H65Es Hydraulic Hammer

US
Metric

Overview

Cat® Hammers for Skid Steer Loaders, Multi Terrain Loaders, Compact Track Loaders, Mini Excavators and Backhoe Loaders are high performance breakers, designed for maximum performance on demolition, construction and road work.
Impact Energy Class
800.00 ft-lbf
1085.00 J
Blows per Minute
720-1740
Max. Rated Flow
30.00 gal/min
115.00 L/min
Min. Rated Flow
10.00 gal/min
40.00 L/min
Max. Operating Weight
860.00 lb
390.00 kg
Minimum Operating Weight
695.00 lb
315.00 kg
Maximum Operating Pressure
2393.00 psi
16500.00 kPa
Minimum Operating Pressure
1450.00 psi
10000.00 kPa
Maximum Carrier Weight
19800.00 lb
8981.00 kg
Minimum Carrier Weight
6600.00 lb
2994.00 kg
Tool Diameter
2.68 in
68.00 mm
Impact Energy Class
800.00 ft·lbf
1085.00 J
Blows per Minute
720-1740
Maximum Operating Weight
860.00 lb
390.00 kg
Maximum Rated Flow
30.00 gal/min
115.00 l/min
Minimum Rated Flow
10.00 gal/min
40.00 l/min
Impact Frequency
720-1740 bpm
Operating Weight - With Tool
860.00 lb
390.00 kg
Optimal Hydraulic Flow
40-115 lpm (10-30 gpm)
Tool Shaft Diameter
2.70 in
68.00 mm
Overall Width
14.00 in
346.00 mm
Overall Length
18.00 in
451.00 mm
Overall Height
52.00 in
1324.00 mm
Height - Without Tool
38.00 in
953.00 mm
Features

Application

Used in a wide range of construction and light demolition applications - such as breaking concrete sidewalks and driveways, pavement, roads, masonry, site prep and landscaping, and breaking frozen ground for utility repairs.

Silenced

Fully enclosed, silenced housing lowers overall noise level for a quieter, safer job site. Internal power cell is protected, designed and engineered to eliminate stress points.

Flat Top/Top-Mount Style

Flat top/top-mount style provides a larger work area and excellent operator visibility with a common footprint and hole pattern for optimum versatility. Top-mount style increases impact power by keeping breaker force and stick force in line. A top-mount bracket will transfer back significantly less recoil and bending stress into the end of the stick, resulting in reduced impact on machine structures. Full complement of mounting brackets is available to suite coupler or pin-on preference.

Auto Shut Off (ASO)

ASO instantly stops the piston when breaking through material, preventing blank firing, a key contributor to hammer wear. Internal stresses are reduced, hammer is protected regardless of operator skill level.

Integral Accumulator

Integral accumulator on H55Es/H65Es provides additional protection for the machine's hydraulic system.

Tri-Suspension System

Tri-Suspension system comprises the suspension jacket, the upper and lower buffers. Suspension aligns power cell and gives manageable, smooth peformance.

Standing Height Grease Point

Standing height grease point makes required maintenance comfortable and easy to perform.

Easy to Tune & Maintain

Gas ports and valves are easy to check and charge while hammer is mounted to machine.

Ports positioned for Hose protection

Improved routing protects against force and dirt during impact, eliminating downtime.

Hammer Tools

Tools are heat-treated, matched to piston diameter and provide optimum mass to deliver full blow energy.