S305 Mobile Scrap & Demolition Shear

US
Metric

Overview

Ideal for interior demolition tasks, the compact S305 mounted on a Cat® Skid Steer Loader or Mini Excavator goes where no other demolition tool can. Remove conduits, wiring and interior fixtures.

Shear Forces

Throat Force
204.00 Sh Ton
1812.00 kN
Apex Force
73.00 Sh Ton
653.00 kN
Tip Force
43.00 Sh Ton
385.00 kN
Cycle Time - Open
3.50 s
3.50 s
Cycle Time - Close
2.50 s
2.50 s

Dimensions

Weight - Boom Mount
1340.00 lb
608.00 kg
Weight - Stick Mount
1280.00 lb
580.00 kg
Jaw Opening
9.40 in
240.00 mm
Jaw Depth
11.00 in
290.00 mm
Jaw Width - Moving
2.00 in
60.00 mm
Jaw Width - Fixed
9.00 in
230.00 mm
Length
67.00 in
1709.00 mm
Height
26.00 in
660.00 mm
Width
15.00 in
390.00 mm

Hydraulic Requirements

Cutting Circuit - Maximum Relief Pressure
3625.00 psi
25000.00 kPa
Cutting Circuit - Maximum Flow
16.00 gal/min
60.00 l/min
Rotation Circuit - Maximum Relief Pressure
1450.00 psi
10000.00 kPa
Rotation Circuit - Maximum Flow
5.30 gal/min
20.00 l/min

Dimensions

Length
67.00 in
1709.00 mm
Height
26.00 in
660.00 mm
Width
15.00 in
390.00 mm

Apex Force
73.00 Sh Ton
653.00 kN
Cutting Circuit - Maximum Flow
16.00 gal/min
60.00 l/min
Cutting Circuit - Maximum Relief Pressure
3625.00 psi
25000.00 kPa
Cycle Time - Close
2.50 s
2.50 s
Cycle Time - Open
3.50 s
3.50 s
Height
26.00 in
660.00 mm
Jaw Depth
11.00 in
290.00 mm
Jaw Opening
9.40 in
240.00 mm
Jaw Width - Fixed
9.00 in
230.00 mm
Jaw Width - Moving
2.00 in
60.00 mm
Length
67.00 in
1709.00 mm
Rotation Circuit - Maximum Flow
5.30 gal/min
20.00 l/min
Rotation Circuit - Maximum Relief Pressure
1450.00 psi
10000.00 kPa
Throat Force
204.00 Sh Ton
1812.00 kN
Tip Force
43.00 Sh Ton
385.00 kN
Weight - Boom Mount
1340.00 lb
608.00 kg
Weight - Stick Mount
1280.00 lb
580.00 kg
Width
15.00 in
390.00 mm
Cycle Time - Open
3.50 s
3.50 s
Cycle Time - Open
3.50 s
3.50 s
Cycle Time - Open
3.50 s
3.50 s
Cycle Time - Open
3.50 s
3.50 s
Features

Jaw Design

Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.

360-degree Rotation

Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.

Reversible Knives

The four main, side and front knives are fully reversible with four effective cutting edges.

Easy Maintenance

Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.

Protected Cylinder

Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.

Completely Cat

Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.