Engine
Net Power - 2,200 rpm - SAE J1349 Rating
Net Power - 2,200 rpm - ISO 9249 Rating
Net Power - 2,200 rpm - EEC 80/1269 Rating
Note
*Engine meets U.S. EPA Tier 4 Final emission standards.
Weights
Buckets
Transmission
Hydraulic System
3rd Auxiliary Flow
14.00 gal/min
52.00 l/min
Hydraulic Cycle Time - Lift
Hydraulic Cycle Time - Dump
Hydraulic Cycle Time - Lower, Float
Cab
Service Refill Capacities
Dimensions (Approximate) – Standard
Overall Length with Bucket*
Reach at Maximum Dump Height*
Hinge Pin at Maximum Height
Departure Angle (degrees)
Overall Length with Forks
Fork Height at Maximum Reach
Fork Reach at Maximum Height
Turning Radius Over Bucket*
Turning Radius Inside Tire**
Steering Angle – Left/Right
Dump Angle at Maximum Height
Operating Specifications – Standard Lift
Operating Specifications - Standard Lift
Operating Specifications – Standard Lift
Rated Operating Load @ Full Turn, Bucket
Straight Tipping Load, Bucket
Full Turn Static Tipping Load, Bucket
Rackback, Transport Position
Rated Operating Load @ Full Turn, Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center) (80% of FTSTL)
Rated Operating Load @ Full Turn, Forks (EN 474-3:2006, Rough Terrain, 500 mm (20 in) Load Center) (60% of FTSTL)
With Additional Counterweight – Operating Weight
With Additional Counterweight – Rated Operating Load @ Full Turn, Bucket
With Additional Counterweight – Straight Tipping Load, Bucket
With Additional Counterweight – Full Turn Static Tipping Load, Bucket
With Additional Counterweight – Rackback, Transport Position
With Additional Counterweight – Rated Operating Load @ Full Turn, Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center) (80% of FTSTL)
With Additional Counterweight – Rated Operating Load @ Full Turn, Forks (EN 474-3:2006, Rough Terrain, 500 mm (20 in) Load Center) (60% of FTSTL)
Maximum Material Densities – General Purpose
Note
Based on ISO 7546: 1983 and rated operating loads at full turn and standard linkage, without additional counterweight
Maximum Material Density
2545.00 lb/yd3
1540.00 kg/m3
Maximum Material Densities – Light Material
Maximum Material Density
1480.00 lb/yd3
875.00 kg/m3
Dimensions (Approximate) - High Lift
Overall Length - With Bucket*
Reach at Maximum Dump Height*
Hinge Pin at Maximum Height
Departure Angle - Degrees
Overall Length - With Forks
Fork Height at Maximum Reach
Fork Reach at Maximum Height
Turning Radius - Over Bucket*
Turning Radius - Inside Tire**
Steering Angle - Left/Right
Dump Angle at Maximum Height
Operating Specifications - High Lift
Rated Operating Load at Full Turn - Bucket
Straight Tipping Load - Bucket
Full Turn Static Tipping Load - Bucket
Rack Back - Transport Position
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% of FTSTL)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (60% of FTSTL)
With Additional Counterweight - Operating Weight
With Additional Counterweight - Rated Operating Load at Full Turn - Bucket
With Additional Counterweight - Straight Tipping Load - Bucket
With Additional Counterweight - Full Turn Static Tipping Load - Bucket
With Additional Counterweight - Rackback - Transport Position
With Additional Counterweight - Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center) (80% of FTSTL)
With Additional Counterweight - Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm (20 in) Load Center) (60% of FTSTL)
Maximum Material Densities - Light Material
Note
Based on ISO 7546: 1983 and rated operating loads at full turn and standard linkage, without additional counterweight
Engine
Weights
Service Refill Capacities
Dimensions (Approximate) - Standard Lift
Departure Angle - Degrees
Dump Angle at Maximum Height
Fork Height at Maximum Reach
Fork Reach at Maximum Height
Hinge Pin at Maximum Height
Overall Length - With Bucket*
Overall Length - With Forks
Reach at Maximum Dump Height*
Steering Angle - Left/Right
Turning Radius - Inside Tire**
Turning Radius - Over Bucket*
Engine
Note
*Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Material Densities - General Purpose
Maximum Material Density
2545.00 lb/yd³
1540.00 kg/m³
Note
Based on ISO 7546: 1983 and rated operating loads at full turn and standard linkage, without additional counterweight
Maximum Material Densities - Light Material
Maximum Material Density
1480.00 lb/yd³
875.00 kg/m³
Operating Specifications - Standard Lift
Full Turn Static Tipping Load - Bucket
Rack Back - Transport Position
Rated Operating Load at Full Turn - Bucket
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (60% of FTSTL)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% of FTSTL)
Straight Tipping Load - Bucket
With Additional Counterweight - Full Turn Static Tipping Load - Bucket
With Additional Counterweight - Operating Weight
With Additional Counterweight - Rackback - Transport Position
With Additional Counterweight - Rated Operating Load at Full Turn - Bucket
With Additional Counterweight - Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center) (80% of FTSTL)
With Additional Counterweight - Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm (20 in) Load Center) (60% of FTSTL)
With Additional Counterweight - Straight Tipping Load - Bucket