Engine
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
Emissions (U.S. EPA Tier 4 Final): Net Power – SAE J1349
Emissions (U.S. EPA Tier 4 Final): Gross Power – ISO 14396
Emissions (U.S. EPA Tier 4 Final): Rated Speed
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995
3514.00 lb/ft
4765.00 N·m
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
Emissions (Tier 2 Equivalent): Net Power - SAE J1349
Operating Specifications
Rated Payload – Standard (face material)
Rated Payload – High Lift (face material)
Buckets
Transmission
Transmission Type
Cat Planetary Power Shift
Axles
Hydraulic Cycle Times
Hydraulic Cycle Time
Raise
9.40 seconds
9.40 seconds
Dump
1.80 seconds
1.80 seconds
Hydraulic Cycle Times
Hydraulic Cycle Time
Total Hydraulic Cycle Time
19.30 seconds
19.30 seconds
Hydraulic System – Steering
Steering System – Circuit
Steering System – Pump
Piston, Variable Displacement
Maximum Flow @ 1,350 rpm
95.00 gal/min
360.00 L/min
Steering Cut Off Pressure
Hydraulic System - Steering
Steering Cycle Times - Low Idle
Steering Cycle Times - High Idle
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Lift/Tilt System - Pump
Variable Displacement Piston
Hydraulic System – Lift/Tilt
Maximum Flow at 1,850 rpm
254.00 gal/min
960.00 L/min
Hydraulic System - Lift/Tilt
Relief Valve Setting - Lift/Tilt
Hydraulic System – Lift/Tilt
Sound Performance
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level – Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level – Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Brakes
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks
Ground to Bumper Clearance
Rear Axle - Centerline to Bumper
Dimensions – Standard Lift (Approximate)
Dimensions - Standard Lift - Approximate
Ground to Lower Hitch Clearance
Ground to Center of Axles
Dimensions – Standard Lift (Approximate)
Rack Back Angle at Ground Level
Dimensions - Standard Lift - Approximate
Rack Back Angle - Ground Level
Rack Back Angle - Carry
22.73 ft
6927.00 mm
52.7 degrees
B-Pin Height - Maximum Lift
Maximum Overall Height - Bucket Raised
30.50 ft
9313.00 mm
65 degrees
Dimensions – Standard Lift (Approximate)
Dump Angle at Maximum Lift
Dimensions - Standard Lift - Approximate
Dump Angle at Maximum Lift
6.95 ft
2118.00 mm
50 degrees
Dimensions - High Lift - Approximate
Ground to Top of Exhaust Stacks
Ground to Bumper Clearance
Rear Axle - Centerline to Bumper
Dimensions – High Lift (Approximate)
Dimensions - High Lift - Approximate
Ground to Lower Hitch Clearance
Ground to Center of Axles
Dimensions – High Lift (Approximate)
Rack Back Angle at Ground Level
Dimensions - High Lift - Approximate
Rack Back Angle - Ground Level
Rack Back Angle - Carry
24.58 ft
7544.00 mm
52.5 degrees
B-Pin Height - Maximum Lift
Maximum Overall Height - Bucket Raised
33.08 ft
10109.00 mm
65 degrees
Dimensions – High Lift (Approximate)
Dump Angle at Maximum Lift
Dimensions - High Lift - Approximate
Dump Angle at Maximum Lift
6.86 ft
2092.00 mm
50 degrees
Operating Specifications
Operating Weight – Standard
Operating Weight – High Lift
221847.00 lb
100628.00 kg
Engine
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396
Emissions (Tier 2 Equivalent): Rated Speed
1750.00 r/min
1750.00 r/min
Emissions (Tier 2 Equivalent): Net Power - SAE J1995
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995
3537.00 lb/ft
4796.00 N·m
Note (Tier 4 Final) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 2 Equivalent) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Hydraulic System - Lift/Tilt
Service Refill Capacities
Differentials and Final Drives – Front
Differentials and Final Drives – Rear
Hydraulic System - Implement
Hydraulic System - Steering
Hydraulic System – Steering
Steering Cycle Time (high idle)
4.40 seconds
4.40 seconds
Engine
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349
Emissions (U.S. EPA Tier 4 Final): Rated Speed
1750.00 r/min
1750.00 r/min
Operating Specifications
Rated Payload - High Lift (Moderate to High Digging Resistance)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
Transmission
Transmission Type
Cat Planetary Power Shift
Hydraulic System - Lift/Tilt
Maximum Flow at 1,850 rpm
254.00 gal/min
960.00 l/min
Hydraulic Cycle Times
Buckets
Axles
Brakes
Sound Performance
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hydraulic System - Steering
Maximum Flow at 1,350 rpm
95.00 gal/min
360.00 l/min
Steering Cut Off Pressure
Steering System - Circuit
Steering System - Pump
Piston, Variable Displacement
Hydraulic Cycle Times
Total Hydraulic Cycle Time
Service Refill Capacities
Fuel Tank
413.00 gal (US)
1562.00 l
Dimensions - High Lift - Approximate
Clearance at 45° Dump (Tooth Tip)
Rack Back Angle - Maximum Lift
Dimensions - Standard Lift - Approximate
Clearance at 50° Dump (Tooth Tip)
Rack Back Angle - Maximum Lift
Engine
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396
Hydraulic System - Steering
Operating Specifications
Operating Weight - High Lift
221847.00 lb
100628.00 kg
Operating Weight - Standard
Service Refill Capacities
Differential - Final Drives - Front
Differential - Final Drives - Rear
Sound Performance
Machine Sound Power Level - Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.