Engine
Maximum Gross Power: Maximum Engine Speed
Maximum Gross Power - ISO 14396
Maximum Gross Power - SAE J1995
Maximum Gross Power: ISO 14396 (DIN)
Rated Net Power: Rated Engine Speed
Rated Net Power - SAE J1349
Weights
Operating Specifications
Service Refill Capacities
Hydraulic System (including tank)
Buckets
Engine
Rated Net Power - ISO 9249
Rated Net Power - ISO 9249 (DIN)
Maximum Gross Torque - SAE J1995
Maximum Gross Torque: ISO 14396
Maximum Net Torque: SAE J1349
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - ISO 9249
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Steering
Steering Articulation Angle - Each Direction
Maximum Flow - Steering Pump
21.70 gal/min
82.00 l/min
Maximum Working Pressure – Steering Pump
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
Loader Hydraulic System
Maximum Flow – Implement Pump
43.60 gal/min
165.00 L/min
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, Standard
25.00 gal/min
95.00 L/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40.00 gal/min
150.00 l/min
Maximum Flow – Implement Pump: 4rd Function, Maximum Flow
25.00 gal/min
95.00 L/min
Maximum Working Pressure – Implement Pump
Relief Pressure - Tilt Cylinder
Relief Pressure – Tilt Cylinder: 3rd Function Relief Pressure
Relief Pressure – Tilt Cylinder: 4th Function Relief Pressure
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
Hydraulic Cycle Time - Dump, at Maximum Reach
Hydraulic Cycle Time - Rackback
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
Forward and Reverse - Low Range, Speed Range 1*
Forward and Reverse: Low Range, Speed Range 2
Forward and Reverse - High Range
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Tires
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA L3; 17.5-R25 L2/L3, 3PC Rim; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; 20.5 R25 L2 Snow, 3PC Rim; 20.5 R25 XHA-2 L3, 3PC Rim; 20.5-25 12PR; Solid Tires
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS
SAE J1040 MAY94, ISO 3471-1994
FOPS
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (standard)
Loader Hydraulic System
Hydraulic Cycle Times:: Rack Back
2.20 seconds
2.20 seconds
Note
All cycle times listed are with cylinder snubbing turned off.
Service Refill Capacities
Engine
Maximum Gross Power - ISO 14396 (DIN)
Maximum Gross Power - Maximum Engine Speed
2350.00 r/min
2350.00 r/min
Rated Net Power - Rated Engine Speed
2200.00 r/min
2200.00 r/min
Weights
Service Refill Capacities
Hydraulic System - Including Tank
Operating Specifications
Engine
Buckets
Engine
Service Refill Capacities
Cab
ROPS
SAE J1040 MAY94, ISO 3471-1994
FOPS
SAE J/ISO 3449 APR98, Level II, ISO 3449:2005 Level II
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Engine
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - SAE J1349
Engine
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Loader Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
Maximum Flow - Implement Pump
43.60 gal/min
165.00 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25.00 gal/min
95.00 l/min
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25.00 gal/min
95.00 l/min
Maximum Working Pressure - Implement Pump
Note
All cycle times listed are with cylinder snubbing turned off.
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
Service Refill Capacities
Steering
Maximum Working Pressure - Steering Pump
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Transmission
Forward and Reverse - Low Range, Speed Range 2
Buckets
Bucket Capacities - General Purpose
Engine
Maximum Gross Power - DIN ISO 14396
Rated Net Power - DIN ISO 14396
Tire Option - 17.5-25 L2 SGL
Note
This chart represents the change with tire option as compared to standard XTLA tire.
Turning Radius: Outside of Tires
Tire Option - 17.5X25 SOLID
Note
This chart represents the change with tire option as compared to standard XTLA tire.
Turning Radius: Outside of Tires
Tire Option - 20.5 R25 XHA2
Note
This chart represents the change with tire option as compared to standard XTLA tire.
Turning Radius: Outside of Tires