Engine
Engine Power (Maximum) – ISO 14396
Engine Power (Maximum) – ISO 14396 (DIN)
Net Power – ISO 9249/SAE J1349
Net Power - ISO 9249/SAE J1349 (DIN)
Weights
Buckets
Capacity – General Purpose
Capacity - Performance Series
Undercarriage
Track Shoe Width – Standard
22.00 in
550.00 mm
Double Grouser
Track Shoe Width – Optional
Track Rollers/Shoes - Each Side
17.70 in
450.00 mm
Jul-38
Ground Contact Area - Standard Shoe
Ground Contact Area - Optional Shoe
Ground Pressure(1) - Standard Shoe
Ground Pressure(1) - Optional Shoe
Ground Pressure – Standard Shoe
Ground Pressure – Optional Shoe
Grouser Height – Double Grouser
Drive System
Track Motor
Two, variable displacement, bent axis motors
Hydraulic System – Equipment
Type
Closed center, load sensing piston
Output
60.80 gal/min
230.00 L/min
Main Relief Valve Setting
Service Refill Capacities
Ripper Specifications
Shank Cross Section
58.5 mm × 138 mm (50 in × 5.4 in)
Added Machine Length with Ripper in Transport Position
Standards
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
Brakes
Brakes meet the standard ISO 10265:2008.
Bucket Cycle Times
Lift
5.50 seconds
5.50 seconds
Power Down
3.70 seconds
3.70 seconds
Float Down
2.00 seconds
2.00 seconds
Dump at Maximum Height (from full rackback)
1.30 seconds
1.30 seconds
Engine
Emissions
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Buckets
Width - Performance Series
Drive System
Drive System
Hydrostatic drive with infinite machine speeds to 10.0 km/h (6.2 mph)
Drive Pump
Two, variable displacement, slipper-type axial piston pumps
Track Motor
Two, variable displacement, bent axis motors
Service Refill Capacities
Bucket Cycle Times
Rackback at Maximum Height (from full dump)
1.40 seconds
1.40 seconds
Standards
Cab – Declared Dynamic Operator Sound Pressure Level
The declared dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
Cab – Hearing Protection
Hearing protection is recommended when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment.
Cab – Declared Exterior Sound Power Level
The declared exterior sound power level is 108 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008”. The measurement was conducted at the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Dimensions
Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes
Dimensions (Approximate)
Overall Machine Width without Bucket: With Narrow Tracks – 450 mm (17.7 in) Shoes
Dimensions
Machine Height - Top of Cab
Dimensions (Approximate)
Dimensions
Carry Position Approach Angle
Maximum Rollback - Ground/Carry Position
Dimensions (Approximate)
Maximum Rollback at Carry Position
Dimensions
Bucket Height - Carry Position
Reach at Full Lift Height and 45° Dump*
Clearance at Full Lift Height and 45° Dump*
Maximum Rollback/Dump - Fully Raised
Dimensions (Approximate)
Maximum Dump, Fully Raised
Dimensions
Height - Bucket Hinge Pin
Overall Machine Height - Bucket Fully Raised
Dimensions (Approximate)
Height to Top of Seat with Headrest
Dimensions
Note
*With General Purpose bucket and extra duty teeth.
Weights
Engine
Note
Engine power ratings occur at 1,800 rpm.
Note
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Undercarriage
Track Shoe Width – Wide Gauge
Ground Contact Area – Wide Gauge*
Ground Pressure – Wide Gauge*
Note
Ground pressure is calculated using operating weight of machine with General Purpose bucket.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Weights
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Note
Operating Weight Wide Gauge: Includes coolant, lubricants, 100% fuel tank, Wide Flush bucket, heavy counterweight light + additional, 75 kg (165 lb) operator.
Buckets
Capacity – High Retention
Bucket Width – Wide Flush
Standards
Cab – Labeled Sound Power Level
The labeled sound power level is 111 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC.
Dimensions (Approximate)
Overall Machine Width without Bucket: With Wide Gauge Tracks – 800 mm (31.5 in) Shoes
Note
Dimensions vary with bucket. Refer to Operating Specifications chart.
Undercarriage
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Service Refill Capacities
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Engine
Net Power - ISO 9249/SAE J1349
Undercarriage
Ground Pressure - Optional Shoe
Ground Pressure - Standard Shoe
Grouser Height - Double Grouser
Track Shoe Width - Optional
Track Shoe Width - Standard
Service Refill Capacities
Weights
Buckets
Capacity - General Purpose
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Dimensions
Note
*With General Purpose bucket and extra duty teeth.
Engine
Emissions
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Note (1)
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Service Refill Capacities
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Undercarriage
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Weights
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.