Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Power - Net SAE J1349/ISO 9249** - Forward
Engine Power - Gross SAE J1995* - Forward
Engine Power - Gross SAE J1995* - Reverse
Engine Power - ISO 14396* - Forward
Engine Power - ISO 14396* - Reverse
Engine Power - Net SAE J1349/ISO 9249** - Reverse
Emissions
U.S. EPA Tier 4 Final/EU Stage V
Note (1)
*Excludes all fan losses.
Note (2)
All Engine ratings apply at 1,800 rpm.
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
Engine - U.S. EPA Tier 2 Equivalent
Engine Power - Net SAE J1349/ISO 9249** - Forward
Engine Power - Net SAE J1349/ISO 9249** - Reverse
Engine Power - Gross SAE J1995* - Forward
Engine Power - Gross SAE J1995* - Reverse
Engine Power - ISO 14396* - Forward
Engine Power - ISO 14396* - Reverse
Emissions
U.S. EPA Tier 2 Equivalent
Note (1)
*Excludes all fan losses.
Note (2)
All Engine ratings apply at 1,800 rpm.
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
Fuel Tank Capacities
Fuel Tank - Usable Volume
323.30 gal (US)
1224.00 l
Fuel Tank - Total Volume
335.20 gal (US)
1269.00 l
FLUID CAPACITY
Fuel Tank - Total Volume
335.20 gal (US)
1269.00 l
FLUID CAPACITIES
Fuel Tank - Usable Volume
323.30 gal (US)
1224.00 l
Cooling System Refill – Tier 4 Final Engine
Power Train - Total Volume
Power Train - Refill Volume
Track Roller Frames (each)
Weights
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
Hydraulic Controls
Pump Type
Variable displacement piston
Pump Output - Implement
112.00 gal/min
424.00 l/min
Note (1)
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
Fan Pump
21.70 gal/min
82.00 l/min
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
Tilt Cylinder Flow - Rod End Flow
112.00 gal/min
424.00 l/min
Tilt Cylinder Flow - Head End Flow
63.40 gal/min
240.00 l/min
Lift Cylinder Relief Valve Setting
Tilt Cylinder Relief Valve Setting
Ripper - Lift - Relief Valve Setting
Ripper - Pitch - Relief Valve Setting
Cylinder Sizing - Blade Lift - Bore
Cylinder Sizing - Blade Tilt - Bore
Cylinder Sizing - Ripper Shank Lift - Bore
Cylinder Sizing - Ripper Shank Angle - Bore
Cylinder Sizing - Blade Lift - Stroke
Cylinder Sizing - Blade Tilt - Stroke
Cylinder Sizing - Ripper Shank Lift - Stroke
Cylinder Sizing - Ripper Shank Angle - Stroke
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Undercarriage
Number of Carrier Rollers
Steering and Brakes
Steering Type
Hydraulically Applied Multiple-Disc Steering Clutch
Brake Type
Spring Applied Multiple-
Disc Brake
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
Transmission
Transmission Clutch Diameter
Dimensions (Approximate)
Width - Without Trunnions - 610 mm/24 in ES
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
Overall Length - Basic Tractor
Length - With Single-Shank Ripper
Length - With Multi-Shank Ripper
Overall Length - SU-Blade/SS Ripper
Blades
10SU ABR - Capacity (SAE J1265)
10SU ABR - Width (over end bits)
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
10U ABR - Width (over end bits)
10U ABR - Capacity (SAE J1265)
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
Blade - Semi-Universal
Blade Capacity (SAE J1265)
Blade Width (over end bits)
Blade - Universal
Blade Capacity (SAE J1265)
Blade Width (over end bits)
Ripper - Single Shank
Maximum penetration force * (shank vertical)
Maximum penetration depth (standard tip)
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
Maximum penetration depth (standard tip)
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Blades
10SU ABR - Digging Depth - Blade Pitch: Nominal
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
10SU ABR - Ground Clearance - Maximum Tilt LH
10SU ABR - Ground Clearance - Maximum Tilt RH
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
10U ABR - Digging Depth - Blade Pitch: Nominal
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
10U ABR - Ground Clearance - Maximum Tilt LH
10U ABR - Ground Clearance - Maximum Tilt RH
10U ABR - Weights - Blade Weight*
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.