319 Hydraulic Excavator

High Performance and Productivity

    
• Work confidently in space-restricted areas. Dig, swing, and dump within a tight working space.
    
• The advanced hydraulic system helps provide the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
    
• The heavy lift feature boosts lifting capacity by up to 7% to help you handle heavy materials safely and efficiently.¹
    
• Match your machine to the job with power modes. Let Smart mode automatically match engine and hydraulic power to working conditions. Power mode constantly helps provide maximum productivity, and Eco mode helps minimize fuel consumption in less-demanding applications.
    
• Get high production in demanding applications, easily penetrate into piles, and fast cycle times with help from Cat^® Advansys™ bucket tips. Quickly change tips with a simple lug wrench instead of a hammer or special tool, to help improve safety and uptime.
    
• Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
    
• The Cat C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
    
• Don’t let the temperature stop you from working. The excavator has an optional cold start capability down to -25°C (-13°F).

Integrated Cat® Technologies

    
• The latest operator oriented User Interface (UI) has been designed to maximize uptime by allowing operators to easily reorder work tool lists and quickly create new work tool combinations. It also eliminates the need to measure up again when changing Cat^® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.
    
• Leverage standard Cat Grade with 2D system with indicate-only and laser capability to help boost productivity.
    
• The Cat Grade 3D Ready option includes all the hardware required for the Grade with 3D system, installed and tested from the factory. Activation requires the purchase of additional 3D software licenses.
    
• All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
    
• Cat Grade with Assist helps operators stay on grade simply and effortlessly with semi-autonomous digging. It automates boom, stick, and bucket movements to deliver more accurate cuts with less effort.
    
• Cat Payload provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials. Advanced Payload is a system upgrade that offers expanded features and capabilities, including custom tags, daily totals, and electronic ticketing. Combine Payload with VisionLink^TM* to analyze jobsites and individual assets for remote management of production targets and key metrics.
    
• Optional Operator Coaching is an in-cab system that recognizes specific opportunities for operators to be more productive and prevent unnecessary machine wear and tear.

Take the Guesswork out of Managing Your Equipment

    
• VisionLink^TM provides actionable data insights for all assets – regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Equipment management features provide up-to-date asset tracking of your entire fleet. You can track asset location, operating hours, fuel level, health issues, and overall utilization. Monitor equipment health with fault codes, fluid analysis, and inspection due dates. It's all about making informed, data-based decisions to help reduce operating costs. Productivity management features enable you to analyze overall job site performance. You'll be able to track tonnage moved, production targets, and payload. These vital metrics help you to reduce costs and improve jobsite operational efficiency.
    
• Cat^® Inspect is a mobile application that allows you to easily perform digital preventative maintenance (PM) checks, inspections, and daily walkarounds. Inspections can easily be integrated with other Cat data systems like VisionLink^TM so you can keep a close eye on your fleet.
    
• Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
    
• Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.
    
• The Cat PL161 attachment locator allows you to track attachments across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The work tool recognition** feature automatically adjusts machine settings based on the selected tool.

Work in Comfort

    
• Deluxe and Premium cab options vary by region.
    
• The Deluxe seat is heated and air adjustable. The Premium seat is heated and cooled and adjusts automatically.
    
• Get in and out of the cab easier using the tip-up left console available in the deluxe and premium cabs.
    
• Advanced viscous mounts help you feel comfortable in the cab while you work with reduced cab vibrations.
    
• Control the excavator comfortably with easy-to-reach controls all located in front of you.
    
• Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, and coat hook are also provided.
    
• Use the standard radio’s USB ports and Bluetooth^® technology to connect personal devices and make hands-free calls.

Simple to Operate

    
• Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
    
• Not sure how a function works or how to maintain your machine? Simply access the operator’s manual through the touchscreen monitor.
    
• Navigate quickly on the standard high-resolution touchscreen monitor with an easy-to use menu or with the aid of the jog dial control.
    
• Start the engine with the push-to-start button, a Bluetooth key fob, or the unique Operator ID function.
    
• Program your power mode and joystick preferences using Operator ID; the excavator remembers your settings each time you go to work.
    
• Easily move the excavator with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
    
• Additional auxiliary relays allow you to power on or turn off a CB radio, beacon light, and even a dust suppression watering system without taking your hands off the joysticks.
    
• Cat asset tracking devices allow you to track attachments across all jobsites, reduce the number of lost attachments, and plan for attachment maintenance and replacement.
    
• Tiltrotator attachments – ours or other brands – work seamlessly with Cat 2D Grade, Assist, Payload, and E-Fence. With no additional hardware required, all you have to do is simply select "Third Party Tiltrotator System Installation" in the monitor, do the calibration, and get to work.

Maintenance

    
• Quickly check and service your machine with daily maintenance points accessible from ground level.
    
• Check the engine oil level quickly and safely from the ground. Fill and check engine oil on top of the machine with a conveniently located second dipstick.
    
• Track your machine’s filter life and maintenance intervals on the in-cab monitor.
    
• Long life filters for fuel, hydraulic oil, and air help save on maintenance costs.
    
• The hydraulic oil filter helps provide high filtration performance, anti-drain valves to help keep oil clean when the filter is replaced, and long life with a 3,000-hour replacement interval.
    
• High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to help keep cores clean without interrupting your work.
    
• Scheduled Oil Sampling (S•O•S^SM) ports are located at ground level, helping simplify maintenance and allowing for quick, easy extraction of fluid samples for analysis.
    
• Boost productivity with proactive service reminders. The integrated vehicle health management system alerts the operator with step-by-step service guidance along with parts needed so you don't experience any unnecessary downtime.

Safety Features

    
• Optional Cat Detect - People Detection kit for excavators is an intelligent vision camera system that can alert an operator when someone enters a machine’s hazard zone.*
    
• The wide undercarriage is designed for optimum stability helping keep you secure and in control especially on rough or uneven terrain.
    
• Cat Command remote control enables equipment operators to work safely outside the machine when working in hazardous environments.
    
• Cat 2D E-Fence restricts the front linkage from moving beyond operator-defined preset boundaries for the ceiling, floor, wall, swing, and cab.
    
• The standard Rollover Protective Structure (ROPS) cab meets ISO 12117-2:2008 requirements.
    
• Small cab pillars, large windows, and a wide skylight hatch help provide great vertical visibility.
    
• The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
    
• The ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
    
• Rear and right-side-view cameras are standard. Upgrade to 360° visibility to easily see objects and personnel around the excavator in a single view.
    
• The service platform design helps provide easy, safe, and quick access to the upper service platform. Platform steps use anti-skid punch plate to help prevent slipping.
    
• Optional boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.
    
• Optional Operator Protective Guards (OPG) protect from falling and flying debris.
    
• Optional inspection lighting helps make service work easy and safe. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.

Sustainability

    
• The Cat^® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
    
• Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
    
• Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while helping to reduce fuel burn and greenhouse gas emissions by improving efficiency, jobsite productivity, and accuracy.
    
• Cat Grade with Assist helps operators stay on grade simply and effortlessly with semi-autonomous digging. It automates boom, stick, and bucket movements to deliver more accurate cuts with less effort.
    
• Auto Engine Speed Control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
    
• Cat Payload for excavators provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials.
    
• Cat 2D E-Fence restricts the front linkage from moving beyond operator-defined preset boundaries for the ceiling, floor, wall, swing, and cab. This not only ensures the safety of personnel but also saves on costly repairs, equipment downtime, and potential jobsite fines.
    
• Extended maintenance intervals not only help reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
    
• VisionLink^TM displays the CO₂ emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
    
• Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
    
• Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

Attachments

Tackle your jobs with a complete Cat solution. Cat attachments are not just accessories – they are essential tools that define what your machine can do. When you pair a Cat excavator with Cat attachments, you unlock a fully integrated system built for performance, durability, and efficiency. Whether you are clearing land, breaking concrete, or compacting soil, the right attachment transforms your excavator into a powerful, multi-purpose tool ready for any challenge. Depending on your project or application, you could benefit from excavator attachments such as:

    
• Buckets: Handle everything from digging and grading to cleanup and debris removal with your excavator. Cat offers general duty, heavy duty, extreme duty, and severe duty buckets, as well as specialized designs for ditch cleaning, rock, and finishing work. Reinforced edges and wear-resistant materials ensure long-lasting performance in tough conditions.
    
• Couplers: Cat couplers for excavators enable fast, secure attachment changes, without the need to leave the cab. From Pin Grabbers to hydraulic quick connect options, couplers help reduce downtime, boost jobsite efficiency and promote versatility by allowing multiple machines to share a common attachment inventory.
    
• Demolition and Sorting Grapples: Tackle larger debris or precisely sort materials into piles. These grapples are engineered for accuracy in demolition and material sorting, handling concrete, rebar, wood, and mixed debris. High clamping force and agile movement make them ideal for primary and secondary demolition and recycling operations.
    
• Hammers: Break concrete, rock, and steel with up to 1,000 blows per minute. Built for high-production demolition, quarrying, and construction, they offer powerful impact energy and consistent performance. Their durability and low-maintenance design make them essential for demanding breaking applications.
    
• Mulchers: Ideal for forestry and agriculture applications. Mulchers clear land and manage vegetation by shredding brush, trees, and undergrowth into fine mulch. Their high-speed rotors deliver fast, consistent results, with interchangeable teeth to suit different materials and desired final mulch size.
    
• Tiltrotators: Tiltrotators provide 360° rotation and 40° left/right tilt functionality, allowing attachments to move with unmatched precision and flexibility. This flexibility transforms your machine into a multi-functional tool capable of working from virtually any angle without repositioning. Ideal for grading, trenching, and complex excavation work, they deliver multi-angle control for tight and confined spaces.