US
Metric

Overview

Cat® H160 S Performance hammers are designed for productivity in rock breaking and concrete demolition. With powerful hydraulics and quick access to maintenance areas, Cat H160 S Performance hammers help increase overall productivity and reduce maintenance costs. Cat H160 S Performance hammers are a versatile solution for many applications, including road construction, trenching, and demolition.
Impact Energy Class
8500.00 ft·lbf
11524.00 J
Blows per Minute
400 to 505
Minimum Operating Pressure
1885.00 psi
13000.00 kPa
Maximum Operating Pressure
2320.00 psi
16000.00 kPa
Minimum Carrier Weight
70600.00 lb
32.00 t
Maximum Carrier Weight
121300.00 lb
55.00 t
Maximum Operating Weight
7784.00 lb
3530.00 kg
Minimum Rated Flow
58.00 gal/min
220.00 l/min
Minimum Operating Weight
7106.00 lb
3230.00 kg
Maximum Rated Flow
79.00 gal/min
300.00 l/min
Tool Shaft Diameter
6.30 in
160.00 mm
Rated Flow - Minimum
58.00 gal/min
220.00 l/min
Rated Flow - Maximum
79.00 gal/min
300.00 l/min
Features

High Performance

        
  • Automatic shut off offers blank firing protection by stopping the piston when there is no material under the tool to help extend the life of the hammer.
  •     
  • The internal buffering system helps reduce machine vibration and increase noise suppression.
  •     
  • The standard silencing feature allows you to use a Performance hammer on job sites in noise-sensitive areas like neighborhoods or near hospitals where noise is regulated.

Increase Productivity

        
  • Manually adjust the piston speed by choosing between high piston speed or maximum power to help increase efficiency and production on the job site.
  •     
  • The oil-fired operating cycle helps provide full power during every blow and less waste heat.
  •     
  • Critical hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.

Easy to Maintain

        
  • Standard on-board autolube provides continuous greasing as the hammer runs, eliminating the need for manual greasing.
  •     
  • The slip-fit and 90-degree rotatable lower bushing allows for easy replacement in the field, helping reduce service time and extend service life.
  •     
  • The oil-fired design eliminates the need to check gas charge.
  •     
  • Quick and easy access to maintenance areas helps make hammer maintenance simple.

Boost Efficiency and Productivity with Integrated Technologies

        
  • Never waste time looking for your attachments again. Cat asset tracking is available on all hammers.
  •     
  • Track your entire fleet of attachments and machines from one source. Hammers with asset tracking can be viewed within VisionLink®.
  •     
  • Keep your assets secure. Hammers with an asset tracker send an alert if they leave an easy-to-set up site boundary.