Engine
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
Weights
Dimensions
Vehicle Width (450 mm/17.7 in tracks)
Turning Radius from Center - Coupler
Rack Back Angle - Maximum Height
Reach - Maximum Lift/Dump
Vehicle Width (400 mm/15.7 in tracks)
Bucket Pin Reach - Maximum Lift
Bucket Pin Height - Carry Position
Turning Radius from Center - Bucket (racked)
Maximum Reach - With Arms Parallel to Ground
Length - With Bucket on Ground
Clearance at Maximum Lift and Dump
Bucket Pin Height - Maximum Lift
Turning Radius from Center - Machine Rear
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Flow
23.00 gal/min
86.00 l/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
32.00 gal/min
121.00 l/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
Cab
Power Train
Travel Speed - Forward or Reverse - Two Speed
Travel Speed - Forward or Reverse - One Speed
Engine
Service Refill Capacities
Engine
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
Engine
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Operating Specifications
Breakout Force - Tilt Cylinder
Breakout Force - Lift Cylinder
Rated Operating Capacity with Optional Counterweight
Ground Contact Area - With 400 mm/15.7 in Track
Ground Pressure - With 400 mm/15.7 in Track
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load
Ground Contact Area - With 450 mm/17.7 in Track
Ground Pressure - With 450 mm/17.7 in Track
Noise Level
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**
104.00 dB(A)
104.00 dB(A)
Engine
Peak Torque - 1,500 rpm - SAE J1995
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.